2023/10/05

• Telecommunications

• Input/Output (IO) Connectors

• Board to Cable Connectors

• Fiber Optic Connectors

• Fiber Optic

FO-BD Series for ポーカー ゲーム 機 賭博 Base Stations

The fifth-generation mobile communication system (ポーカー ゲーム 機 賭博) is expected to be used in various fields by allowing for larger number of devices to be simultaneously connected and with low latency, capable of transmitting large-capacities over high-speeds. In addition to live distribution of 4K and 8K images and entertainment, such as VR/AR experience and watching various sporting events, it is believed that ポーカー ゲーム 機 賭博 will be utilized in the field of remote control technology and IoT, as commercial services for ポーカー ゲーム 機 賭博 have been in global use since 2019.

Japan Aviation Electronics Industry (JAE) has developed an innovative lineup of connectors for ポーカー ゲーム 機 賭博 base stations over the years. Below is an introduction of our new FO-BD Series optical connectors for use in ポーカー ゲーム 機 賭博 applications.

Overcoming Thermal Issues in ポーカー ゲーム 機 賭博 Base Stations

One of the key issues facing ポーカー ゲーム 機 賭博 base stations today is the ‘thermal issue’, associated with increased power consumption. Especially in the case of SFP transceivers, which perform optical to electrical conversion, where the performance longevity is largely affected by the operating temperatures. Cooling methods, such as heat sinks and cooling fans, become necessary in making effective thermal management and size reduction of base stations difficult.

The FO-BD7 series was designed as an external I/O which allows the ポーカー ゲーム 機 賭博eiver, which generates a lot of heat, to be physically located on the outside of the base station enclosure. This layout not only reduces the heat generated inside of the base stations but also contributes to the size reduction of base stations. Heat from other large heat sources inside the base station is transferred to the SFP cage through the board and radiated to the enclosure panel by way of the receptacle. This helps to prevent the ポーカー ゲーム 機 賭博eiver from being exposed to excessive heat. In addition, by using metal for the connector barrel that houses the ポーカー ゲーム 機 賭博eiver, heat can be more effectively transferred away from the ポーカー ゲーム 機 賭博eiver (Figure 1).

Through the implementation of the FO-BD7 series, the operating temperature of the ポーカー ゲーム 機 賭博eiver can be reduced by approximately 10°C compared with ポーカー ゲーム 機 賭博eivers which are housed inside of the base station enclosure (Figs. 2 and 3).

Wide Variety of Connector Variations for ポーカー ゲーム 機 賭博 Base Stations

JAE has been developing optical connectors for base stations since 2000 (Figure 4). Originally, we developed a “relay connector” that connects the base station enclosure panel and wires to the optical transceiver on the board, using optical fibers. In 2010 we developed the SFP direct connection connector to contribute to reducing the size and cost of base station designs.

In addition to the FO-BD7 series the FO-BD2 series and FO-BD6 series connectors are also being adopted into ポーカー ゲーム 機 賭博 base stations, allowing users to select from a wider variety of connectors solutions that meet their specific needs.

FO-BD Series for ポーカー ゲーム 機 賭博 Base Stations

Note: Subject to change without notice. Errors and omission excepted.