韓国 カジノ ポーカーansmission for In-vehicle Information and Communication Devices

韓国 カジノ ポーカーansmission for In-vehicle Information and Communication Devices by JAE electronics

JAE has developed the 韓国 カジノ ポーカー, European standard HSD-compatible connector for high-speed transmission between in-vehicle information and communication technology (ICT) devices.

Recently, multi-function and high-performance ICT in the automotive market has been progressing rapidly. An increase in high-performance cameras and sensors is expected to be required to support new technology such as ADAS, autonomous driving, and connected car.

These advances have resulted in the increase in the volume of the information, and high-speed transmission is essential for processing such large-volume information.

We have developed the 韓国 カジノ ポーカー, which is compatible with the popular HSD-connectors that are commonly used in Europe, for high-speed transmission.

The demand for HSD connectors is expected to grow not only in Europe, but also in markets such as China where in-vehicle products and modules incorporating HSD connectors are deployed.

This product features a double-sided lever spring structure for the locking portion, which increases reliability of the lock and reduces the occurrence of deformation of the locking area.

In addition, the end face (edge) of the connector has a curved surface shape, and is designed to be friendly to the assembler.

Furthermore, the pin-side in-line connector is designed so that clips can be attached to fix the cable harness to the body, etc.

JAE will further expand the variety of European standard products that have become widespread worldwide.

This product will be displayed at the AUTOMOTIVE ENGINEERING EXPOSITION held in Pacifico Yokohama on May 23.

Note) This product is sold only as a cable harness and is not provided as an individual connector.

Features

Applicable Markets

For various types of in-vehicle ICT devices, ideal for wiring between equipment requiring high-speed transmission.

Line-up

韓国 カジノ ポーカー

(As of April 2018)

 2-row right angle type is scheduled to start mass production in September.

General Specifications

No. of Contacts :4 (STQ1), 8 (STQ2), and 6 (STQ1 + Max. two discrete)
Note) STQ: Shielded Twisted Quad Wire
Operating Temperature Range :-40°C to + 105°C
Maximum Operating Temperature :105 °C (ambient temperature + temperature rise due to energization)

Electrical Wire Specifications

:for STQ (two pairs of differential signals)
Please contact us for details regarding specific wires.
Basic specifications :
Differential 100Ωx 2-pair type
◎Wire Type 1.
Conductors: 0. 14 sq x 4
Jacket outer diameter: 4.0 mm
◎Wire Type 2. (Non-waterproof type only)
Conductors: 0. 14 sq x 4
Jacket outer diameter: 4.6 mm
Differential 90Ωx 2-pair type
◎Wire Type 3.
Conductors: 0. 14 sq x 4
Jacket outer diameter: 4.0 mm
◎Wire Type 4. (Non-waterproof type, socket type only)
Conductors: 0. 22 sq x 4
Jacket outer diameter: 4.6 mm
Discrete wire
FLRY type-B, 0.35 sq size and 0.75 sq size

Material and Finish

Straight Socket Side (Non-waterproof type)

Component Material / Finish
Outer Housing PBT GF15
Retainer PBT
Shell Brass / Ni plating
Inner Housing PBT
Signal Terminal

Material: Copper alloy

Plating:

Contact --- Au plating

Crimp ---Sn plating

Sleeve Brass / Sn plating

Straight Socket Side (Waterproof Type)

Component Material / Finish
Outer Housing PBT GF30
Retainer PBT GF30
Shell Brass / Ni plating
Inner Housing PBT
Signal Terminal

Material: Copper alloy

Plating:

Contact --- Au plating

Crimp ---Sn plating

Sleeve Brass / Sn plating
Sealing Ring Silicone rubber
Grommet Silicone rubber

Straight Socket Side (Non-waterproof type)

Component Material / Finish
Outer Housing PBT
Shell

Spring part: copper alloy / Ni plating

Body: brass / Ni plating

Inner Housing PBT
Signal Terminal

Material: Copper alloy

Plating:

Contact --- Au plating

Crimp ---Sn plating

Sleeve Brass / Sn plating

Socket Side Right Angle (Waterproof type)

Component Material / Finish
Outer Housing PBT GF30
Retainer PBT GF30
Cover Housing PBT GF30
Shell Brass / Ni plating
Inner Housing PBT
Signal Terminal

Material: Copper alloy

Plating:

Contact --- Au plating

Crimp ---Sn plating

Sleeve Brass / Sn plating
Seal Ring Silicone rubber
Grommet Silicone rubber
Cover Ring Stainless
Outer Cover Hot-melt materials

Pin Side Relay Type (Non-waterproof type)

Component Material / Finish
Outer Housing SPS GF30%
Retainer PBT
Shell Brass / Ni plating
Inner Housing PBT
Signal Terminal

Material: Copper alloy

Plating:

Contact --- Au plating

Crimp ---Sn plating

Sleeve Brass / Sn plating
 

Information and details given here are as of the date of publication. Please note that the details may be changed.